Professional SPF roof installation, coating, and insulation in Chalmette, LA. Free inspections. Call today for a no-obligation estimate.
Full-spectrum spray foam solutions for residential and commercial buildings in Chalmette, LA.
Extend the life of your existing roof by 15 to 20 years with a silicone coating that seals every seam, reflects solar heat, and handles ponding water without softening or deteriorating. Professional application with manufacturer warranty.
Upgrade your attic insulation from fiberglass or cellulose to spray foam and feel the difference the same day. SPF does not settle, sag, or leave gaps — it expands to fill every cavity and seals air leaks that other materials miss.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
Professional flat roof repair for all membrane types — TPO, EPDM, modified bitumen, built-up, and PVC. We find the actual source of the leak using infrared scanning and fix it permanently, not with another temporary patch.
Hail, wind, and debris damage demand immediate attention and thorough documentation. Our crews respond quickly, document all damage with photos and measurements that satisfy insurance adjusters, and restore your roof completely.
Active roof leak? We locate the source using advanced detection methods, then repair it permanently at the root cause. No guesswork, no temporary patches — just lasting results backed by our workmanship warranty.
Know the true condition of your roof before problems escalate. Our inspection process covers every component — membrane, flashings, penetrations, drains, and substrate — and delivers a clear, actionable report you can trust.
Expert repair for existing SPF roofs including blistering, coating deterioration, punctures, and storm damage. We restore your foam roof to like-new condition with matching materials and factory-specified application techniques.
When restoration is not enough, our crews perform complete roof tear-off and replacement with modern spray foam roofing systems. Full deck inspection, substrate repair, SPF application, and protective coating — all warranted.
Our commercial restoration process preserves your existing roof structure, adds insulation value, and applies a warranted waterproof coating system — saving 50 to 70 percent versus tear-off and replacement on buildings of any size.
Our maintenance programs extend roof life and reduce total cost of ownership. Semi-annual or annual visits include drain clearing, seam inspection, penetration checks, coating condition assessment, and immediate repair of minor issues.
Transform your crawl space from a moisture liability into a conditioned, energy-efficient part of your building envelope. Spray foam eliminates condensation, prevents mold conditions, and dramatically improves floor comfort above.
When your roof is structurally sound but the surface is deteriorating, restoration is the smart investment. We clean, repair, and recoat your entire roof with a warranted system that performs like new at a fraction of replacement cost.
Serving the growing community of Chalmette, LA, Lapolla Industries delivers the same spray foam roofing and insulation technology trusted by commercial and industrial facilities across the nation. Our Chalmette crews combine deep SPF expertise with local knowledge of Louisiana building codes and climate demands.
Whether you need a spray foam roof on your commercial building, silicone coating on your flat roof, or closed-cell insulation in your attic, Lapolla Industries brings the equipment, materials, and experience to do it right. Every project in Chalmette starts with a free inspection and ends with a warranty you can count on.
Here is what sets Lapolla Industries apart from other contractors in Chalmette.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Common questions about spray foam roofing and insulation in Chalmette, LA.
A properly installed SPF roof in Chalmette can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Spray foam insulation costs in Chalmette typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Chalmette homeowners see a full return on investment through energy savings within 3 to 5 years.
Spray foam is one of the best solutions for flat and low-slope roofs in Chalmette. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Most residential attic insulation projects in Chalmette are completed in a single day. Our crews prep the space, apply the spray foam to the desired thickness, and clean up within 6 to 8 hours. The foam cures within minutes, and you can feel the difference in your home comfort levels the same day.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Chalmette homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Yes. Every project in Chalmette begins with a no-obligation roof inspection. Our crews assess the condition of your existing roof, identify problem areas using infrared moisture scanning when needed, and provide a detailed estimate with photos and recommendations. There is never a charge for the initial inspection.
Our reputation is built on results. Here is what our customers say.
"Our commercial building needed a roof solution that would not require tenant relocation. The restoration approach was perfect — no tear-off noise or debris, minimal odor, and a fully warranted system installed in under two weeks."
"Our corrugated metal roof was rusting at every fastener and seam. They cleaned the entire surface, treated the rust, and applied a thick elastomeric coating. The roof looks brand new and is completely sealed now."
"Full roof replacement on our 12,000 square foot commercial building. Lapolla Industries removed the old single-ply membrane and installed spray foam with a silicone topcoat. Clean work, professional crew, and a 20-year warranty."
We also provide spray foam roofing and insulation services in these neighboring communities.